Trick flow out of the box modifications.

Reply Subscribe

Thread Tools

Search this Thread

Apr 7, 2010 | 12:19 PM

armyboyatc

Thread Starter

TECH Fanatic

iTrader: (29)

Joined: Feb 2009

Posts: 1,063

Likes: 15

From: Olive Branch, MS

Trick flow out of the box modifications.

Is anyone taking the trickflow heads out of the box and sending them to the head shop to get modified? I am running a stock bottom end set up and I was reading and found that the trick flow 215s are a all around good head. I was wanting to know what everyone was doing to them, what u can do to them, and why u would modify them out of the box. Any info or personal opinion is welcome. Thanks
Trey

Apr 7, 2010 | 12:23 PM

GT-OH

On The Tree

iTrader: (7)

Joined: Jun 2006

Posts: 147

Likes: 0

From: Warminster PA

I know the only thing I did was have them milled.

Apr 7, 2010 | 06:51 PM

Silver408z

TECH Apprentice

iTrader: (1)

Joined: Jan 2010

Posts: 350

Likes: 0

From: Arlington, TX

I am pretty sure TEA was doing some work on them for awhile. Would have to check and see if they are still. Poeple do it to get just a little more out of the setup.

Apr 8, 2010 | 07:13 AM

kickassT/A

TECH Fanatic

iTrader: (3)

Joined: Jul 2003

Posts: 1,092

Likes: 0

From: Houston, Tx

tea is who cnc's them for trickflow. you could have them hand finish your set before they ship

Apr 8, 2010 | 09:20 AM

cam

TECH Junkie

iTrader: (9)

Joined: Apr 2004

Posts: 3,389

Likes: 67

From: in the garage

Quote:

Originally Posted by kickassT/A

tea is who cnc's them for trickflow. you could have them hand finish your set before they ship

Thats about all I've seen recommended for these as well. IIRC Trickflow posted up in a thread somewhere when these launched and mentioned that you could do it yourself with a sand paper roll and just carefully smooth out the CNC grooves but otherwise they were as good as they could get them. I cant recall what board that was on though this was a while back now.

Regardless they are damn fine heads IMO

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last