Few Questions about a LSX block
Few Questions about a LSX block So im starting to get my parts for a new motor build
1st gen LSX block, Going to be N/A
I read some where that there was a oiling issue with the blocks? anything special need to be done with the block?
Are there a special type of lifters/ or lifter trays that should be used?
And what is the best cam bearing to use with the block?
any other things that should be addressed while putting it together?
Thanks
Nick
1st gen LSX block, Going to be N/A
I read some where that there was a oiling issue with the blocks? anything special need to be done with the block?
Are there a special type of lifters/ or lifter trays that should be used?
And what is the best cam bearing to use with the block?
any other things that should be addressed while putting it together?
Thanks
Nick
Launching!
Joined: Feb 2010
Posts: 297
Likes: 1
From: Indy
One thing I will tell you is let someone that knows what they are doing machine and build it. The LSX stuff has a lot of little tricks that need to be done that will pay off 10x in the long run. Spend the extra now with someone before it costs more extra parts.
