corvette_uae1

hi

well its a simple question i did a research and couldnt find anything

lets say u have an ls2 with forced induction + cam and u installed a wrong shorten or longer pushrod lenth

would u loose around 40 to 50 hp or u just hear a noisy sound ? and damage ur engine

vettenuts

iTrader: (4)

Do you know the preload you are running? If they are very short (no preload at all) or way too long (holding valves open) it would make a differences.

Slowhawk

iTrader: (12)

You can easilly lose that on a supercharged car. BUT the factory lifters and a big window for setup. Too short (no preload)and you can damage the lifter/cam and motor. Too long could float the valve or cause P/V contact.

Sometimes valvetrain is just noisy no matter what you do.

corvette_uae1

فthanks alot u helped me alot guys wow i hope this is my problem

MEANGENE75

iTrader: (1)

Can definately cost you power. Gotta measure to get it right.