Help me Decide on a Rotating Assy LSX427
02-12-2011, 07:09 PM
#1
TECH Resident
Thread Starter
iTrader: (12)
Join Date: Jul 2004
Location: Georgetown, IL 61846-1105
Posts: 988
Likes: 0
Received 1 Like
on
1 Post
Help me Decide on a Rotating Assy LSX427 Hey guys,
As some of you know I'm building an LSX 427 NA motor......No plans for any power adder, if at ANY time maybe a small 125 spray...
Here's what I am looking at, but I would greatly appreciated the seasoned engine builder's opinions
Callies Dragonslayer 4.000" Dry Sump Crank
Callies Compstar 6.125" Rod
Wiseco Piston kit # K463X125
Should just use the Wiseco ring kit, or go with a Total Seal? I have been looking on TSP's site and they show $2685 for this setup balanced and with bearings.
FEEL FREE to give a QUOTE if you have this setup as an option
The heads I have are GM LSX-LS7 heads untouched, I will be sending to Richard@WCCH. I would like to land 11.5-12.0:1 to run on 93octane. Please any insight on this matter would be GREATLY appreciated.
As some of you know I'm building an LSX 427 NA motor......No plans for any power adder, if at ANY time maybe a small 125 spray...
Here's what I am looking at, but I would greatly appreciated the seasoned engine builder's opinions
Callies Dragonslayer 4.000" Dry Sump Crank
Callies Compstar 6.125" Rod
Wiseco Piston kit # K463X125
Should just use the Wiseco ring kit, or go with a Total Seal? I have been looking on TSP's site and they show $2685 for this setup balanced and with bearings.
FEEL FREE to give a QUOTE if you have this setup as an option
The heads I have are GM LSX-LS7 heads untouched, I will be sending to Richard@WCCH. I would like to land 11.5-12.0:1 to run on 93octane. Please any insight on this matter would be GREATLY appreciated.
Last edited by XxXTransAmXxX; 02-12-2011 at 07:47 PM.
