Valve lash/preload
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: May 2011
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I replaced some bent/broken pushrods on my ls1 camaro and torqued the rocker arms to 22 lb/ft. The cam is stock as well as all of the valve train. I followed the information from ls1howto http://www.ls1howto.com/index.php?article=23
The car runs fine im just concerned about too tight or loose, please weigh in
The car runs fine im just concerned about too tight or loose, please weigh in