What is needed to make an LS2 24x into a 58X?
Thread Starter
Teching In
Joined: Apr 2012
Posts: 2
Likes: 0
What is needed to make an LS2 24x into a 58X? OK guys, This is a great forum which has inspired me to put an LS into my 70 GTO. So here goes my first post.
I've been doing tonnes of reading and I need to change my reluctor wheel to a 58x to make my 6l90 work.
Other than the 58x wheel/crank sensor and the 4x cam sproket is there anything else I need to switch?
Any help here is much appreciated. I need to get this done in a hurry.
Thanks,
Woody
I've been doing tonnes of reading and I need to change my reluctor wheel to a 58x to make my 6l90 work.
Other than the 58x wheel/crank sensor and the 4x cam sproket is there anything else I need to switch?
Any help here is much appreciated. I need to get this done in a hurry.
Thanks,
Woody
Make sure you spec the right 4X cam sprocket...there are 2 from GM, one for a 1 bolt cam and 1 for a 3 bolt cam. If you want it for a 3 bolt cam, order it for something like a 2008 LS7. If you want it for a 1 bolt cam, order a 2010 Camaro LS3 sprocket.
