Reluctor wheel confusion... Please Help

Reply Subscribe

Thread Tools

Search this Thread

Sep 5, 2012 | 06:05 PM

94LS2

Thread Starter

Teching In

iTrader: (12)

Joined: Oct 2009

Posts: 16

Likes: 0

From: STL

Reluctor wheel confusion... Please Help

Here is what I have, quick and easy:

Built ls2 with what I was told a 58x reluctor wheel.

Well engine starts runs real rough and someone said make sure the reluctor wheel is correct for application.

After taking pictures and looking at it, Im convinced it is a 24x reluctor wheel...

Please opinions on what you think.

1st pic is reluctor wheel seen through the crank sensor hole

and

2nd pic is my reference to which is which by lingenfelter.

Thanks guys

Attached Thumbnails

Reluctor wheel confusion... Please Help-mail.jpg

Reluctor wheel confusion... Please Help-mails.jpg

Sep 5, 2012 | 06:33 PM

94LS2

Thread Starter

Teching In

iTrader: (12)

Joined: Oct 2009

Posts: 16

Likes: 0

From: STL

FWIW the crank sensor is black...

Sep 5, 2012 | 06:50 PM

RQSGTO

Staging Lane

Joined: Jun 2007

Posts: 64

Likes: 0

From: MIchigan

That's a 24x reluctor and a black sensor is the correct sensor, the 58x sensor is gray.

Last edited by RQSGTO; Sep 5, 2012 at 07:04 PM.

Sep 5, 2012 | 07:06 PM

94LS2

Thread Starter

Teching In

iTrader: (12)

Joined: Oct 2009

Posts: 16

Likes: 0

From: STL

I was told about the sensor being black for 24x and gray for 58x. Thanks for clarification, I was swearing it was 24x also but person that built it told me 58x by mistake or whatnot I don't know.