Putting head back on...
Putting head back on... I had to recently pull the head and am reinstalling it tomorrow. I wanted to find out i anyone knows how the head bolts should be tighten down (order of them). Also, i have a new mls gasket, is there any preparation i need to do to the block or the new gasket? Also is there anything else that i need to do to re install
The head properly?
The head properly?
Everything you need to know is right here
http://www.ls1howto.com/index.php?article=3
Please don't forget to make sure your bolt holes are clean and dry! If not you'll crack the block.
http://www.ls1howto.com/index.php?article=3
Please don't forget to make sure your bolt holes are clean and dry! If not you'll crack the block.
I would like to +1, this is very important on reinstall
__________________
NOW OFFERING TSP BY YANK CONVERTERS
COMP - FAST - PACESETTER - WISECO PISTONS - LUNATI - CALLIES - NEW TSP BRAND CRANK & RODS - COMETIC GASKETS
RAM CLUTCHES - MOSER ENGINEERING - ARH HEADERS - ARP - GM BOLTS AND GASKETS - MSD - NGK
POWERBOND - ASP - PRECISION INDUSTRIES - YANK - CIRCLE D - AND MORE!
COMP - FAST - PACESETTER - WISECO PISTONS - LUNATI - CALLIES - NEW TSP BRAND CRANK & RODS - COMETIC GASKETS
RAM CLUTCHES - MOSER ENGINEERING - ARH HEADERS - ARP - GM BOLTS AND GASKETS - MSD - NGK
POWERBOND - ASP - PRECISION INDUSTRIES - YANK - CIRCLE D - AND MORE!
NEW NUMBER (512)863-0900
