PRC head and stroker question
05-12-2013 | 06:49 PM
#1
Thread Starter
Teching In
Joined: May 2012
Posts: 19
Likes: 1
From: Davenport, IA.
PRC head and stroker question First off, if this is in the wrong area mods please feel free to move it.
My question is this. I have a set of PRC aftermarket 250cc heads, would these work well on the TSP 418 or will they be to small a head for this motor. I'm not looking for end all horsepower out of the combo but would like to see 500 rwhp. This is for a daily driver G8 GXP. It would definately have a custom cam spec'd for it also. If you have any experience with such a combo or other thoughts you would like to provide please post them. Thanks for any input that you may be able to provide.
Tony
My question is this. I have a set of PRC aftermarket 250cc heads, would these work well on the TSP 418 or will they be to small a head for this motor. I'm not looking for end all horsepower out of the combo but would like to see 500 rwhp. This is for a daily driver G8 GXP. It would definately have a custom cam spec'd for it also. If you have any experience with such a combo or other thoughts you would like to provide please post them. Thanks for any input that you may be able to provide.
Tony
