LS3 Cam Selection at Altitude
Thread Starter
Teching In
Joined: Jun 2013
Posts: 17
Likes: 0
LS3 Cam Selection at Altitude Looking for a mild street cam for my mn6 Corvette up in Denver (5280'). Do I need to factor the altitude equation into my choice? What should I be looking for due to the lack of air up here? Really just want torque under the curve, not a 1/4 mile cam. Hope to get to what others have stock at sea level!!
Thx
Thx
That's correct, but he still has lower octane fuel limitations still from the pump I imagine. OP what fuel do you plan on running/have available? Your total setup and tuner will be a factor as well if you can share details of intake/exhaust combo, auto/manual and max rpm that would help steer you in the right direction.
Thread Starter
Teching In
Joined: Jun 2013
Posts: 17
Likes: 0
All we can get up here is 91 octane. It's a 6 mn. I don't care about peak HP, but I want to see added torque by 3000 rpm. I spoke to the tuner today and he claims to have had good luck with the Katech Torquer 224/236, 581/601, 113 LSA. I'll also do long tubes w/cats and a Haltech intake. Comments/suggestions appreciated.
