Block DoD ports with pushrod ..Pics ..
Thread Starter
TECH Fanatic
iTrader: (37)
Joined: May 2008
Posts: 1,034
Likes: 0
From: ocala,fl--- forest-ocklawaha
Block DoD ports with pushrod ..Pics .. Im cheap and dont wanna buy a ls3 cover or drill and tap the DoD ports , so i took a push rod, cut into 8 sections , tac welded the end , prob could use jb weld if dont have a welder .. and drove them in the dod ports.. very tight fit , didnt have to hit them to hard tho .. there deffinelty snugged in and arnt moving ,, thought i share ..
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG] 
It will only go down to the galley where the cam shaft is and the hole down there isn't large enough for the pushrod piece to come in contact with the cam. Up top, all it can do is run into the valley cover. Now if all 8 of them comes loose and he loses oil pressure, then he has a problem 
