L92 motor work with MS4 cam?
L92 motor work with MS4 cam? I know there are some issues with PTV with just L92 heads and the LS2, but Im running the factory L92 short block also with the factory valve reliefs. Anybody see a reason why this cam wont work. I know its a huge cam.
I ran this ms4 in my lq9 with milled 243's and 7.425 pushrods. thats without valve reliefs and never had an issue. Im sure with the valve reliefs as long as your not milling them down to raise the compression a bunch it'll work.
