cr250r

iTrader: (4)

Waiting on some things for my forged 5.3l to be complete had a gen 4 4.8l come up i bought it going to see how far i can push this after seeing john gillands and robert melcher push gen 3 4.8l engines into the 900rwhp range im using left over parts will a pitted cam hurt the bearings?

1CAMWNDR

iTrader: (21)

Get a new cam. I would not put that in any engine of mine....especially if I was looking to make power. Besides, you can spec it for the turbos .

cr250r

iTrader: (4)

216/220 trick flow

cr250r

iTrader: (4)

Gunna use 862 heads for compression 26lbs s362 twin turbos e85 belt drive before i throw my forged 5.3l in

DavidBoren

Should be loads of fun. What are you going to put the 4.8L in after you install the forged 327?

cr250r

iTrader: (4)

4.8l is going in firstbif it blow ill drop the 5.3l in if it lives a couple years the 5.3l will probably find a home in my 64 chevy II nova with bw s366s an drop the 388 gen 1 sbc an go from 10's to 8's