Valve seal help
Thread Starter
Teching In
Joined: Jun 2013
Posts: 9
Likes: 1
From: Oregon
Valve seal help Currently doing a cam swap in a 2010 Camaro SS M6 and I hurt 2 valve seals, does anybody know if OEM seals will work, or what aftermarket seal I could use? The seals I got from BTR were included in the .660" LIFT PLATINUM SPRING kit. I called BTR and they advised I buy another set from them as they did not have any part number recommendations. I would LOVE to find some local to Portland so I can still make my tuning appointment. Thanks
Teching In
Joined: Mar 2013
Posts: 24
Likes: 0
From: New Zealand
oem seals wont fit if using dble valve springs, I used these:
http://www.summitracing.com/int/part...1-16/overview/
http://www.summitracing.com/int/part...1-16/overview/
