Gen4 24x
Teching In
Joined: Aug 2016
Posts: 45
Likes: 0
From: Memphis, TN
I purchased a remanufactured crank from autozone because I know a guy. The part number is "11110" If you look it up on their site it has a vehicle fitment you can cross reference. Hope this helps and someone please correct me if you see misinformation.
Restricted User
Joined: Mar 2014
Posts: 7,192
Likes: 109
From: Ohio
Joined: May 2004
Posts: 1,593
Likes: 267
From: Halfway back on the Highway to Hell...again!
You can use any 3.622 crank. Any shop that does LS builds or machine work can put a new reluctor on. A reluctor is only about $20 or so.
I looked into buying the alignment tool so I can do it myself. Sumbitches want $200 for it. The machine shop I deal with would charge me $50 including the wheel. He made his own alignment tool.
I have 3 good cranks in my garage right now. 1 58x and 2 24x.
I looked into buying the alignment tool so I can do it myself. Sumbitches want $200 for it. The machine shop I deal with would charge me $50 including the wheel. He made his own alignment tool.
I have 3 good cranks in my garage right now. 1 58x and 2 24x.
