When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I bought a new set of lifters and there is a bunch of micro scratches on 1 lifter. I can’t feel with my fingernail. But it’s around the whole lifter. Want your opinion if it is ok to use. I don’t want to wipe my cam out. I also don’t want to buy another set of lifers but if I have to I will. Thanks in advance for your input.
The lifter trays should only be replaced with GM trays. There are a lot of tray issues with generic trays. IIRC…… GM trays have gussets in a circular pattern where the lifter go in.
The lifter trays should only be replaced with GM trays. There are a lot of tray issues with generic trays. IIRC…… GM trays have gussets in a circular pattern where the lifter go in.
THIS 100%. If you're going to run the trays, run GM trays only
06-12-2024, 05:54 PM
Ls lifter issue 
THIS 100%. If you're going to run the trays, run GM trays only