Throttle Cable Bracket for ls2 intake?
 

I have seen threads where the ls2 intake has been fit on ls1's, but they have all been electric tb's. Is anyone making a throttle bracket to use the ls2 intake with the f-body throttle cable setup?

I have a homemade bracket that I welded up. It bolts into the front pass. side intake bolt. I used a TB cable bracket off of my old LS6 manifold. Takes about 5 minutes to fab up.

Do you have any pictures of your setup?

Andrew

I will try and upload them tonight. I have pics, but can't find my damn usb cable.

We are going to make something for this as well.

Nate

My LS2 intake & FAST TB should be here today. I'm looking at maybe doing this sometime this weekend.

Nate, I will need some fuel rails in the future. Hint hint. ;) For now we're going to splice my LS1 rails, but I want some higher flowing ones in the not too distant future.

Got my intake today:) Ordered it yesterday. KJ must be putting next day air on these suckers lol cause I am in NC!

I would like to see pics of bracketts from those of you who have already fabbed them. I still need a TB so I have not messed with it yet.

Brad

Pics
 

Well I was bored yesterday so I hacked up my worthless LS1 intake and stole the TC brackett off of it. Here are some pics of it installed on the LS2.

It looks kinda shitty right now but I am not done. This should give ya a good Idea on what to do tho.

That grey stuff is good ole JB Weld. That sucker is on there GOOD!

Brad

This will be in our kit. Full billet bracket.

Nate

Are you including the bracket, fuel rails, etc. in your kit?

I knew Nate would come through with a billet setup for these intakes! I need to scrap my half-rigged setup and get yours. Any estimation on a release date?

It will include the right O-rings for the injectors rails and the cable bracket. I will also have a kit with the intake and TB.

Should be done this week then off to get polished. If you want to place orders please give me a call.

Nate

Nate, will those fuel rails work w/ the Multec II injectors? I'm looking into running an LS2 intake and FAST TB on my truck, but I would need a return-style setup that would keep my Multec II "truck" injectors.

No it is too cheap and easy to change them out to a standard style injector. Most anyone needing to upgrade that far needs to upgrade the injector as well. Sorry man
Go to a TPIS TB not the FAST it is much higher quality. Better bearings smoother operation and better finish.

Nate

Nate will u be making those rails with some sort of adapter to just plug into the factory fuel lines? It looks very nice-also please don't forget about us C5 guys-we need a plug for the 90MM TB too!

how much are the 90mm round tb from tpis? i have a 98 camaro with ls2 intake manifold.

when will this kit be done and do you have an idea on the price yet?

Vortech- I can add the fittings and braided hose to make them work with your factory lines. What plug are you refering to? I have billet 90mm TB's for the C5 as well.

bmfcamaro- Your return e-mail does not work? The TPIS TB is $475+you stock core.

CamaroSS_2002- I should have something complete this week and off to get polished. I am working on the pricing today I will get back to you guys.

I am taking a list of how needs what so let me know. We can get your orders in so there will be no delay as it is done.

Thanks Nate

When are these going to be available? And what's the cost?

They are ready to go check my post.

Nate