Throttle Cable Bracket for ls2 intake?
Throttle Cable Bracket for ls2 intake? I have seen threads where the ls2 intake has been fit on ls1's, but they have all been electric tb's. Is anyone making a throttle bracket to use the ls2 intake with the f-body throttle cable setup?
I have a homemade bracket that I welded up. It bolts into the front pass. side intake bolt. I used a TB cable bracket off of my old LS6 manifold. Takes about 5 minutes to fab up.
My LS2 intake & FAST TB should be here today. I'm looking at maybe doing this sometime this weekend.
Nate, I will need some fuel rails in the future. Hint hint.
For now we're going to splice my LS1 rails, but I want some higher flowing ones in the not too distant future.
Nate, I will need some fuel rails in the future. Hint hint.
For now we're going to splice my LS1 rails, but I want some higher flowing ones in the not too distant future. Got my intake today
Ordered it yesterday. KJ must be putting next day air on these suckers lol cause I am in NC!
I would like to see pics of bracketts from those of you who have already fabbed them. I still need a TB so I have not messed with it yet.
Brad
Ordered it yesterday. KJ must be putting next day air on these suckers lol cause I am in NC!I would like to see pics of bracketts from those of you who have already fabbed them. I still need a TB so I have not messed with it yet.
Brad
Trending Topics
Pics Well I was bored yesterday so I hacked up my worthless LS1 intake and stole the TC brackett off of it. Here are some pics of it installed on the LS2.
It looks kinda shitty right now but I am not done. This should give ya a good Idea on what to do tho.
That grey stuff is good ole JB Weld. That sucker is on there GOOD!
Brad
It looks kinda shitty right now but I am not done. This should give ya a good Idea on what to do tho.
That grey stuff is good ole JB Weld. That sucker is on there GOOD!
Brad
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Originally Posted by Nasty N8
This will be in our kit. Full billet bracket.
Nate
Nate
It will include the right O-rings for the injectors rails and the cable bracket. I will also have a kit with the intake and TB.
Should be done this week then off to get polished. If you want to place orders please give me a call.
Nate
Should be done this week then off to get polished. If you want to place orders please give me a call.
Nate
Nate, will those fuel rails work w/ the Multec II injectors? I'm looking into running an LS2 intake and FAST TB on my truck, but I would need a return-style setup that would keep my Multec II "truck" injectors.
No it is too cheap and easy to change them out to a standard style injector. Most anyone needing to upgrade that far needs to upgrade the injector as well. Sorry man
Go to a TPIS TB not the FAST it is much higher quality. Better bearings smoother operation and better finish.
Nate
Go to a TPIS TB not the FAST it is much higher quality. Better bearings smoother operation and better finish.
Nate
Nate will u be making those rails with some sort of adapter to just plug into the factory fuel lines? It looks very nice-also please don't forget about us C5 guys-we need a plug for the 90MM TB too!
Originally Posted by Nasty N8
This will be in our kit. Full billet bracket.
Nate
Nate
Last edited by CamaroSS_2002; Nov 4, 2004 at 10:15 AM.
Vortech- I can add the fittings and braided hose to make them work with your factory lines. What plug are you refering to? I have billet 90mm TB's for the C5 as well.
bmfcamaro- Your return e-mail does not work? The TPIS TB is $475+you stock core.
CamaroSS_2002- I should have something complete this week and off to get polished. I am working on the pricing today I will get back to you guys.
I am taking a list of how needs what so let me know. We can get your orders in so there will be no delay as it is done.
Thanks Nate
bmfcamaro- Your return e-mail does not work? The TPIS TB is $475+you stock core.
CamaroSS_2002- I should have something complete this week and off to get polished. I am working on the pricing today I will get back to you guys.
I am taking a list of how needs what so let me know. We can get your orders in so there will be no delay as it is done.
Thanks Nate
Last edited by Nasty N8; Nov 4, 2004 at 11:50 AM.
