C6R Block?
#4
LS1TECH Sponsor
iTrader: (1)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I'm working with Darton to develop the 4.200" MID sleeve for the LS1 block. Should be available this summer. The holdup has been blanks with which to make the sleeves.
I'm going to recommend this large bore sleeve only for LS1 blocks not LS6. The reason is the holes in the main webs take away a great deal of support from the area between the cylinders.
By the way, Cometic already has the gaskets.
Steve
I'm going to recommend this large bore sleeve only for LS1 blocks not LS6. The reason is the holes in the main webs take away a great deal of support from the area between the cylinders.
By the way, Cometic already has the gaskets.
Steve
Originally Posted by ls1290
I thought I heard someone is offereing a new resleeved LS1/LS6 block that can be bored to 4.2".
Keith
Keith
__________________
Steve Demirjian
Race Engine Development
Oceanside, Ca.
760-630-0450
web: www.raceenginedevelopment.com/
e-mail: race-engine-development@***.net
Steve Demirjian
Race Engine Development
Oceanside, Ca.
760-630-0450
web: www.raceenginedevelopment.com/
e-mail: race-engine-development@***.net