Slp Zl402 Tt
#1
402 Twin Turbo
<Slightly rived post since no one replied>
Hi guys, first post.
I'm in the middle of building an SLP ZL402 LS2 TwinTurbo for my 98. I'm using a custom cam (specs attached) with stock lifters and Thunder Racing 7.400 rods. Turbo's are Turbo Technology stage 3. I need to use 1.7 ratio rockers and am thinking of going with a roller rocker. It's always been my belief that rollers yield a flatter torque curve and curb valve train noise. What do you think about the Yella Terra rockers. Any suggestions.
Also need a suggestion for an oil cooler set-up
Hi guys, first post.
I'm in the middle of building an SLP ZL402 LS2 TwinTurbo for my 98. I'm using a custom cam (specs attached) with stock lifters and Thunder Racing 7.400 rods. Turbo's are Turbo Technology stage 3. I need to use 1.7 ratio rockers and am thinking of going with a roller rocker. It's always been my belief that rollers yield a flatter torque curve and curb valve train noise. What do you think about the Yella Terra rockers. Any suggestions.
Also need a suggestion for an oil cooler set-up
Last edited by alx3159; 08-22-2005 at 08:29 PM.