Anyone know of a bellhousing that will fit...
Thread Starter
Teching In
Joined: Dec 2005
Posts: 13
Likes: 0
From: Bellevue, Washington
Anyone know of a bellhousing that will fit... the 2006 version of the LS2 with a T-56 aftermarket 6 speed? I was told that Lakewood 15005 will fit but the tech line says not going to happen. He knew of no others that will work at this point.
i dont know why u dont want to use the Gm t-56, u can get them for next to nothing out of 98-02 f-body's and they are stout pieces ( consistantly holding 700rwhp and tq in my friends 89 Iroc still on the stock t-56) ebay is your friend.
Originally Posted by haphazard6
look at the mcleod modular bell housing, i think they can make that fit almost anything
Thread Starter
Teching In
Joined: Dec 2005
Posts: 13
Likes: 0
From: Bellevue, Washington
If you have to go aftermarket t 56 then I think the mcleod is your only option right now.[/QUOTE]
I've been told by Keisler that the Lakewood bell housing will fit the aftermarket T-56. Have I fallen for it again?
I've been told by Keisler that the Lakewood bell housing will fit the aftermarket T-56. Have I fallen for it again?
