LS7 MLS head gaskets
LS7 MLS head gaskets With all these large bore engine blocks going around (warhawk, GMPP-LSX, C5R, ERL)
Does anybody have information LS7 MLS gaskets? bore size, thickness. Hypothetically they could even be used on 402/408 setup(?)
For large bore engines your options are limited to cometic and Fel Pro MLS (havn't used them yet, so i'd rather not expirament).
Does anybody have information LS7 MLS gaskets? bore size, thickness. Hypothetically they could even be used on 402/408 setup(?)
For large bore engines your options are limited to cometic and Fel Pro MLS (havn't used them yet, so i'd rather not expirament).
Originally Posted by bg @ sdpc
I just checked one of the 7.0L gaskets. It is 4.180" gasket bore. Since it is a MLS gasket it is hard to get an accurate reading with a digital caliper but it is between .060" and .065".
Originally Posted by John B
I have a set of OEM LS7 head gaskets on the shelf and they appear to look just like the OEM LS6 ones that I have.
Originally Posted by John B
The LS7 gaskets appear to be the same uncompressed thickness ~0.055" thick but the bore on the LS7 gasket is larger at 4.150".
Originally Posted by ferocity02
12582179
