i feel dumb asking this but
can you buy a ls7 stoker yet if so where and do they sell upgrade parts for the engine i have looked and can not find any places for ethier yet on the internet let me know where to find these things

thanks

 

i dont know how serious you are about buying one if you don't know if they even exist

 

Katech will cover everything you need. If not W2W or LME.

 

LME is building my LS7. Cleaned up intake with match porting, improved valve components, porting the exhaust, forged Wiseco pistons with better rings, improved connecting rods, pins, studs. Higher compression ratio. Balanced and blueprinted, and according to Brian at LME everything is checked and rechecked prior to ship. can't wait to see and install in the 69. After talking with Brian Gruben at SDPC any cam changes on the factory LS7 would require upgrading the valve components, they are maxed with that stock cam. Forged pistons are a plus. Talk with others, Katech, SDPC are very knowledgeable.

 

i know they exist i just was not sure how many shops are strokeing them yet and where to buy upgraded parts because i am planning on building one and not going with the 408 iron block but im not sure if i am going to build it myself or have a shop build it

but to you guys that answered my dumb question thanks and to the other guy your a dumb *** read before you reply

thanks

 

hope I'm not the dumb *** guy.

 

why even reply