LS2 Heads???
LS2 Heads??? I am currently building an iron 408 for my TA with a desent size cam(ms4, trex) and was wondering if LS2/LS6 heads would dissapoint me on power and torque. I am aiming for about 480ish rwhp and good power under the curve but i do not know if these heads would prevent that. All help appreciated
TECH Fanatic
Joined: Jul 2005
Posts: 1,084
Likes: 1
From: Keller, Texas
not to jack the thread but, damn $1200? is it a store or an auction?
i would immagine that that set up will get you at least close to your peak power goal, but you will certainly have great power and torque down low.
i would immagine that that set up will get you at least close to your peak power goal, but you will certainly have great power and torque down low.
TECH Apprentice
Joined: Oct 2004
Posts: 361
Likes: 0
From: courps christi tx.
Originally Posted by THE_SUPRA
not to jack the thread but, damn $1200? is it a store or an auction?
i would immagine that that set up will get you at least close to your peak power goal, but you will certainly have great power and torque down low.
i would immagine that that set up will get you at least close to your peak power goal, but you will certainly have great power and torque down low.
+1...
A properly ported LS6 head on a 408 with a Fast should be guaranteed 500+ RWHP through a stick.
480 RHWP through a LS6 intake is possible, we just had a set of our LS6 heads make 480 RWHP on a stock shortblock 5.7 through a locked A4...so you goals should be easy, but like was mentioned above, it's not cheap, about $1300 with you supplying the castings.
480 RHWP through a LS6 intake is possible, we just had a set of our LS6 heads make 480 RWHP on a stock shortblock 5.7 through a locked A4...so you goals should be easy, but like was mentioned above, it's not cheap, about $1300 with you supplying the castings.
