having trouble finding a decent piston,any help?
having trouble finding a decent piston,any help? I am having trouble finding a decent piston for a ls2 402, l92 head high compression setup. 4" or 4.005 " bore, 4" rod, needs to be either a flat top with -2cc reliefs, or a small (4-6 cc)dome with reliefs. I am tryin to stay away from a custom piston and like to go with an off the shelf. needs to be a good nitrous piston also. I am trying to get around 13 to 1 CR, without taking too much off the heads or block.
The best piston ive been able to find is a wiesco, -6cc dish with -2cc reliefs. I would have have the heads milled .060" and have the pistons out of the hole .005-.010" and id rather not do that if possible. thanks in advance for any info
Chad
The best piston ive been able to find is a wiesco, -6cc dish with -2cc reliefs. I would have have the heads milled .060" and have the pistons out of the hole .005-.010" and id rather not do that if possible. thanks in advance for any info
Chad
Originally Posted by lifted99GMC
I am having trouble finding a decent piston for a ls2 402, l92 head high compression setup. 4" or 4.005 " bore, 4" rod, needs to be either a flat top with -2cc reliefs, or a small (4-6 cc)dome with reliefs. I am tryin to stay away from a custom piston and like to go with an off the shelf. needs to be a good nitrous piston also. I am trying to get around 13 to 1 CR, without taking too much off the heads or block.
The best piston ive been able to find is a wiesco, -6cc dish with -2cc reliefs. I would have have the heads milled .060" and have the pistons out of the hole .005-.010" and id rather not do that if possible. thanks in advance for any info
Chad
The best piston ive been able to find is a wiesco, -6cc dish with -2cc reliefs. I would have have the heads milled .060" and have the pistons out of the hole .005-.010" and id rather not do that if possible. thanks in advance for any info
Chad
Originally Posted by lifted99GMC
Brian, thanks for the reply.I will be calling you shortly.
Chad
Chad
