Carillo nascar rods...
Thread Starter
On The Tree
iTrader: (4)
Joined: Jun 2006
Posts: 197
Likes: 0
From: Texas / 427ci F1R 1,002 rwhp/928 rwtq
Carillo nascar rods... I saw some rods for sale with what I believe are non-standard bearing journals. Are cranks and pistons realily available for these components or would they have to be one-off custom manufactured?
Specs:
6.125" Long (Center to Center)
1.9755" Crank Pin
0.906" Crank Pin Width
0.787 Wrist Pin Bore
0.700 Wrist Pin Width
531 Grams Total Weight
Specs:
6.125" Long (Center to Center)
1.9755" Crank Pin
0.906" Crank Pin Width
0.787 Wrist Pin Bore
0.700 Wrist Pin Width
531 Grams Total Weight
More than likely custom parts. May be Honda rod sizing. I believe Oliver make's them as well.
Oliver HONDA JOURNAL LTD SERIES RODS
5.400 Center to Center Appox. Wt. 1.890 CRANK PIN with STANDARD ARP-2000 3/8 BOLTS 492 gm 1.890 CRANK PIN with ARP-3.5* 3/8 BOLTS 496 gm
6.000 Center to Center
1.890 CRANK PIN with STANDARD ARP-2000 3/8 BOLTS 510 gm
1.890 CRANK PIN with ARP-3.5* 3/8 BOLTS 514 gm
6.125 Center to Center
1.890 CRANK PIN with STANDARD ARP-2000 3/8 BOLTS 517 gm
1.890 CRANK PIN with ARP-3.5* 3/8 BOLTS 521 gm
6.200 Center to Center
1.890 CRANK PIN with STANDARD ARP-2000 3/8 BOLTS 521 gm 1.890 CRANK PIN with ARP-3.5* 3/8 BOLTS 525 gm
D.J.
Oliver HONDA JOURNAL LTD SERIES RODS
5.400 Center to Center Appox. Wt. 1.890 CRANK PIN with STANDARD ARP-2000 3/8 BOLTS 492 gm 1.890 CRANK PIN with ARP-3.5* 3/8 BOLTS 496 gm
6.000 Center to Center
1.890 CRANK PIN with STANDARD ARP-2000 3/8 BOLTS 510 gm
1.890 CRANK PIN with ARP-3.5* 3/8 BOLTS 514 gm
6.125 Center to Center
1.890 CRANK PIN with STANDARD ARP-2000 3/8 BOLTS 517 gm
1.890 CRANK PIN with ARP-3.5* 3/8 BOLTS 521 gm
6.200 Center to Center
1.890 CRANK PIN with STANDARD ARP-2000 3/8 BOLTS 521 gm 1.890 CRANK PIN with ARP-3.5* 3/8 BOLTS 525 gm
D.J.
Last edited by OneQuickCoupe; Jun 1, 2007 at 08:58 AM.
TECH Enthusiast
Joined: May 2007
Posts: 538
Likes: 0
Nothing standard about that rod. You theoretically should be able to get a crank with a 1.888 rod journal and a .787 wrist pin piston. I would hope you didn't plan on a power added motor with those rods but a nice high rpm screamer would be fine.
Originally Posted by john_sblendorio
I saw some rods for sale with what I believe are non-standard bearing journals. Are cranks and pistons realily available for these components or would they have to be one-off custom manufactured?
Specs:
6.125" Long (Center to Center)
1.9755" Crank Pin
0.906" Crank Pin Width
0.787 Wrist Pin Bore
0.700 Wrist Pin Width
531 Grams Total Weight
Specs:
6.125" Long (Center to Center)
1.9755" Crank Pin
0.906" Crank Pin Width
0.787 Wrist Pin Bore
0.700 Wrist Pin Width
531 Grams Total Weight
