OIl pan spacer?
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
OIl pan spacer? Anyone running alum rods? how did you space or clearance your oil pan?
im pretty sure it will have to be done, anyone sell a spacer?
im pretty sure it will have to be done, anyone sell a spacer?
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Originally Posted by Beast96Z
It would be nice for extra room for the pick up tube as well, but wouldn't that throw off the bottom bell housing bolts?
Thread Starter
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
Originally Posted by Six Speeds Inc.
I know that the moroso pan will clear Aluminum rods. PN-21150
It comes with pan, pickup (relocated to the rear of the pan an baffled) and a full length windage tray. You will also need a remote filter, it is good to get rid of all of those pesky 90 degree bends and mismached holes on the stock pan anyways. I had to clearence it just a touch (on the pan rail) for access to the starter bolts, and open up the holes on the windage tray for the mainstuds, but other than that is was a very easy install.
