59cc Ls6 heads
Thread Starter
Joined: Sep 2004
Posts: 105
Likes: 1
From: St.Charles, Missouri
59cc Ls6 heads Hey guys my buddy has a set of Ls6 heads that im about to pick up from him and they have 59cc. So my question is do I need different set of push rods or can I run stock length? If I need different set of pushrods what size do I need.
TECH Addict
Joined: Jul 2002
Posts: 2,261
Likes: 0
Originally Posted by sidewayz28
7.400 would be my guess
I have a set of these 59CC heads- they are milled .055" to arrive at the 59-60cc vol. Stock pr is 7.450? If I remember correctly 7.400 is what we used.
TECH Resident
Joined: Jun 2007
Posts: 952
Likes: 0
Originally Posted by 1evilss
Hey guys my buddy has a set of Ls6 heads that im about to pick up from him and they have 59cc. So my question is do I need different set of push rods or can I run stock length? If I need different set of pushrods what size do I need.
ifs it been milled .055-u could have to get different pushrods to accomadate-
