I need a picture of LS2 rocker arm Pedestal
#1
I need a picture of LS2 rocker arm Pedestal
Please post a picture of a LS2 rocker arm pedestal and also one of an LS1 if you have it. I have an Ls2 with ETP 225 heads and I dont know what Rocker arm pedestal replacement I need. The stock LS2 one that I ordered has notches but ont he ETP heads its totally flat no place for the notches to fit.
Last edited by Mazdryk; 02-12-2008 at 10:27 PM.
#2
TECH Regular
iTrader: (1)
Join Date: Nov 2003
Location: Washington Township, NJ
Posts: 490
Likes: 0
Received 0 Likes
on
0 Posts
Please post a picture of a LS2 rocker arm pedestal and also one of an LS1 if you have it. I have an Ls2 with ETP 225 heads and I dont know what Rocker arm pedestal replacement I need. The stock LS2 one that I ordered has notches but ont he ETP heads its totally flat no place for the notches to fit.
#4
TECH Regular
iTrader: (1)
Join Date: Nov 2003
Location: Washington Township, NJ
Posts: 490
Likes: 0
Received 0 Likes
on
0 Posts
I don't see why you couldn't run an LS2 lifter. You might need custom length pushrods though since the heads are made with 11 degree valve angles.