l92 carb intake bolts
08-28-2008, 09:02 PM
#1
Teching In
Thread Starter
iTrader: (3)
Join Date: May 2008
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
l92 carb intake bolts i just bought a used l92 carb intake that did not come with hardware. do i use the stock l92 intake gaskets? does anyone have the GM part numbers for the bolts, ive heard theyre different.
08-28-2008, 11:34 PM
#3
Teching In
Thread Starter
iTrader: (3)
Join Date: May 2008
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
gonna run a carb. its pt# 25534401 from GMPP but its machined for the injectors. just gonna get some really small brass freeze plugs for the inj. holes tho.
Last edited by bradyfred77; 08-28-2008 at 11:55 PM.
08-29-2008, 08:25 AM
#4
Gasket PN 19172114, I think Felpro also makes one but I don't know the pn.
Bolts M6x1m thread size. GM does not sell the bolts that came with that manifold for some reason. Use that thread size and figure about 1 inch engagement into the heads for the threads to get the correct length. So basically, measure the bolt hole boss height and add an inch.
Bolts M6x1m thread size. GM does not sell the bolts that came with that manifold for some reason. Use that thread size and figure about 1 inch engagement into the heads for the threads to get the correct length. So basically, measure the bolt hole boss height and add an inch.
