PCV system
08-29-2018, 05:45 PM
#1
PCV system Anyone have a diagram of how the PCV system works on the new Gen V motors, specifically the L86 since I have most of the hoses for this one?
I had read somewhere that the new motors pull air through the valve covers rather than vent like the LS motors. This sounds strange to me and maybe I'm missing something?
The motor I purchased has two hoses coming off the valve covers (one on each side) and I'm wondering what I should do with them? I also have the small PCV (im assuming) hose coming off the valey cover area to the TB similar to LS motors. I'll run this as is then maybe use a catch can later down the road.
I had read somewhere that the new motors pull air through the valve covers rather than vent like the LS motors. This sounds strange to me and maybe I'm missing something?
The motor I purchased has two hoses coming off the valve covers (one on each side) and I'm wondering what I should do with them? I also have the small PCV (im assuming) hose coming off the valey cover area to the TB similar to LS motors. I'll run this as is then maybe use a catch can later down the road.
08-29-2018, 06:16 PM
#2
TECH Senior Member
Go look at a truck with that engine in it. Up close and personal always works for me! Don't forget to take notes! (In my best "teacher" tone of voice).
