Expansion tank
Thread Starter
Teching In
Joined: Aug 2018
Posts: 15
Likes: 0
Expansion tank I'm installing an expansion tank, from what I read you feed it into the lower hose with a tee. I have a Entrophy radiator, it has an npt fitting welded into the tank about 2 inchs above the lower hose for the anode.
Question 1. If I take the anode out would this be suitable to plumb the expansion tank here.
Question 2. As long as I have a proper antifreeze mix do I need to put the anode back in somewhere else or could I leave it out?
Looking for confirmation or rejection of hookup method, pictures of your hook up, better ideas. Thanks, getting close to getting this on the road!
Question 1. If I take the anode out would this be suitable to plumb the expansion tank here.
Question 2. As long as I have a proper antifreeze mix do I need to put the anode back in somewhere else or could I leave it out?
Looking for confirmation or rejection of hookup method, pictures of your hook up, better ideas. Thanks, getting close to getting this on the road!
