LT4 cam in blown L83 ?
Thread Starter
TECH Apprentice
iTrader: (3)
Joined: Nov 2005
Posts: 387
Likes: 1
From: Tinker till it blows, then back it off a notch, maybe!!
LT4 cam in blown L83 ? Would this be a decent fit for a '15 Silverado LTZ, 5.3L w/2.9 whipple?
will be installing the whipple along with non-restrictive fuel line and L86 injectors. Too much low end to start with, the LT4 cam is cheap and has higher fuel pump lobes...
Any thoughts? thanks in advance
will be installing the whipple along with non-restrictive fuel line and L86 injectors. Too much low end to start with, the LT4 cam is cheap and has higher fuel pump lobes...
Any thoughts? thanks in advance
Thread Starter
TECH Apprentice
iTrader: (3)
Joined: Nov 2005
Posts: 387
Likes: 1
From: Tinker till it blows, then back it off a notch, maybe!!
looking thru gmparts, pushrods, rockers, valve spring retainers, locks have all the ame part numbers
Only the lifters from the 6.2L are not the same?? any thoughts?
Also, can't seem to find any beehive style valve springs for lt4 ???
anyone?
Only the lifters from the 6.2L are not the same?? any thoughts?
Also, can't seem to find any beehive style valve springs for lt4 ???
anyone?
