Hi, ex-lurker needs help, please
Thread Starter
Registered User
Joined: Jun 2011
Posts: 46
Likes: 0
Hi, ex-lurker needs help, please I've been reading, and I still have questions.
Like,
(1) Where do I find upgrade pushrods in the $50 price range?
(2) Why aren't there any 7.37" pushrods?
For those of us who want to mill our heads by 0.030", since these rockers aren't adjustable like the old SBC.
(3) Do we just put shims under the rocker stands?
(4) If so, why am I not seeing these advertised?
(5) Are FRPP 19# injectors about the same flow as stock '01 LM7 injectors?
I found out the hard way that LM7 injectors don't fit the Ls1 intake and rails.
(6) Are CTS-V FEAD brackets compatible with F-car or GTO, or both?
Any help will be greatly appreciated!
Like,
(1) Where do I find upgrade pushrods in the $50 price range?
(2) Why aren't there any 7.37" pushrods?
For those of us who want to mill our heads by 0.030", since these rockers aren't adjustable like the old SBC.
(3) Do we just put shims under the rocker stands?
(4) If so, why am I not seeing these advertised?
(5) Are FRPP 19# injectors about the same flow as stock '01 LM7 injectors?
I found out the hard way that LM7 injectors don't fit the Ls1 intake and rails.
(6) Are CTS-V FEAD brackets compatible with F-car or GTO, or both?
Any help will be greatly appreciated!
