Hello, I'm Dave and Iam new here
11-03-2011, 09:21 PM
#1
Registered User
Thread Starter
Join Date: Nov 2011
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Hello, I'm Dave and Iam new here Nice to meet you ladies and gents 
Ive been researching for awhile on a LM swap into a FC RX7, T76 ls1/6 cam intake, you get the pic. after countless hours of looking, hunting for info on tuning ive turned here. I know this may not be appropriate here. maybe the PCM tuning page?, Its very simple! Iam a hardcore old school carb guy. for this future project I see no way i will meet my goals with a blow through setup, So do you just throw a high flowing fuel pump big injectors a 1:1 referenced fpr at the lm7 hook up hp-tuners suite and computer and take it to a dyno? 
just what exactly will i need to run/tune with??? Sorry if this is misplaced any info appreciated.
p.s goals are 500 rwhp reliably
Holmberg.
Ive been researching for awhile on a LM swap into a FC RX7, T76 ls1/6 cam intake, you get the pic. after countless hours of looking, hunting for info on tuning ive turned here. I know this may not be appropriate here. maybe the PCM tuning page?, Its very simple! Iam a hardcore old school carb guy. for this future project I see no way i will meet my goals with a blow through setup, So do you just throw a high flowing fuel pump big injectors a 1:1 referenced fpr at the lm7 hook up hp-tuners suite and computer and take it to a dyno? just what exactly will i need to run/tune with??? Sorry if this is misplaced any info appreciated. p.s goals are 500 rwhp reliably
Holmberg.
