Hotrod builder from Kelowna bc
01-08-2013, 01:13 PM
#1
Registered User
Thread Starter
Join Date: Jan 2013
Location: Kelowna bc
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Hotrod builder from Kelowna bc Hey everyone! It is a privalage to be on here, I know there is a ton of extremly knowledgable people on this site and hope to learn a few things as I go along.
Here is a little about myself. For one I do not know alot about motor or transmission stuff, I concentrated my career on design and sheetmetal shaping for hotrods. I own my own hotrod shop in town and I am also a Collision repair tecnition Instructor at the Okanagan College in Kelowna BC. I am currently building a 51 pontiac with a 6.0l followed by a 4l80 trans. Like I said I dont know a hole lot about this stuff so be gentle lol.
Here is a little about myself. For one I do not know alot about motor or transmission stuff, I concentrated my career on design and sheetmetal shaping for hotrods. I own my own hotrod shop in town and I am also a Collision repair tecnition Instructor at the Okanagan College in Kelowna BC. I am currently building a 51 pontiac with a 6.0l followed by a 4l80 trans. Like I said I dont know a hole lot about this stuff so be gentle lol.
