New guy SE WI
Thread Starter
Teching In
Joined: Jun 2013
Posts: 0
Likes: 0
New guy SE WI Hey everyone, names Jon
im 20 and from SE Wisconsin.
short LS history:
picked up a LQ4 this past winter tore it down found crank all goof'd decided to go full forged 402 with the intention of going boost.
picked up a th400 in winter as well, and built that up a bit, threw a reverse pattern valve body on it
this spring i bought a 2000 SS roller with a moser 12 bolt
The engine is getting ready to be put back together with some LY6 heads and i will be running it N/A the end of this summer/ early in fall hopefully, that way i can break it in a little bit.
Will be an on going project for as long as I can imagine seeing as projects never end.
Look forward to being apart of the community and have already received all sorts of good information.
Jon
im 20 and from SE Wisconsin.
short LS history:
picked up a LQ4 this past winter tore it down found crank all goof'd decided to go full forged 402 with the intention of going boost.
picked up a th400 in winter as well, and built that up a bit, threw a reverse pattern valve body on it
this spring i bought a 2000 SS roller with a moser 12 bolt
The engine is getting ready to be put back together with some LY6 heads and i will be running it N/A the end of this summer/ early in fall hopefully, that way i can break it in a little bit.
Will be an on going project for as long as I can imagine seeing as projects never end.
Look forward to being apart of the community and have already received all sorts of good information.
Jon
