New here and to the ls scene
Thread Starter
TECH Regular
Joined: Aug 2014
Posts: 457
Likes: 0
From: Texas
New here and to the ls scene Name is Steven. I'm starting a new ls swap project and I figured I would get registered here since I've been lurking for a little bit.
Goal is to get a notch back fox body to do the swap. I'm starting the process on getting my motor built. It's an LQ4 6.0L with all LS2 rotating assembly, 317 heads, and a ported LS6 tb and intake. Looking at upgrading the cam and springs too.
I'm going to be doing a turbo build as well. Likely twin 67mm or something similar.
Target goal of 800whp for now.
I look forward to talking to some of you guys. I'm sure I'll have a couple questions
I'll make sure to start a build thread.
Thanks!
Goal is to get a notch back fox body to do the swap. I'm starting the process on getting my motor built. It's an LQ4 6.0L with all LS2 rotating assembly, 317 heads, and a ported LS6 tb and intake. Looking at upgrading the cam and springs too.
I'm going to be doing a turbo build as well. Likely twin 67mm or something similar.
Target goal of 800whp for now.
I look forward to talking to some of you guys. I'm sure I'll have a couple questions
I'll make sure to start a build thread.
Thanks!
Last edited by Steven32; Aug 8, 2014 at 06:45 PM.
