New Ls owner in Mi
05-17-2017, 06:07 AM
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: May 2017
Location: Lansing Mi
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
New Ls owner in Mi Hey whats up everyone?
Finally pulled the trigger and bought an 02 camaro z28 with a ls1 in it.
It is not a show car by any means and needs help but the price was right and I am planning on turning it into a street/strip car that I can rag on and have fun.
This is my first v8 car and have been surfing through the forums here learning what I can.
I have picked up a set of texas speed long tubes, lowering springs, corvette wheels and slotted rotors.
Going to install all this weekend.
Next I will look for a camshaft package and try and squeeze some more power out of the stock ls before I tear it down for boost.
Post up if you guys have tips/tricks or things I should do to this car.
Thank you.
James
Finally pulled the trigger and bought an 02 camaro z28 with a ls1 in it.
It is not a show car by any means and needs help but the price was right and I am planning on turning it into a street/strip car that I can rag on and have fun.
This is my first v8 car and have been surfing through the forums here learning what I can.
I have picked up a set of texas speed long tubes, lowering springs, corvette wheels and slotted rotors.
Going to install all this weekend.
Next I will look for a camshaft package and try and squeeze some more power out of the stock ls before I tear it down for boost.
Post up if you guys have tips/tricks or things I should do to this car.
Thank you.
James
05-17-2017, 07:17 AM
#4
TECH Senior Member
iTrader: (2)
Join Date: Aug 2012
Location: Howell & Fenton MI
Posts: 11,145
Likes: 0
Received 15 Likes
on
15 Posts
There's the MI f-body club. I believe they're out of the Detroit area though. Not sure what's in Lansing. There's also a huge f-body meet in June at Bakers of Milford
05-17-2017, 07:25 AM
#5
On The Tree
Thread Starter
iTrader: (1)
Join Date: May 2017
Location: Lansing Mi
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the info. I will have to check it out. The car is not a show car by any means but it will work for some racing and I wont feel bad if I have to cut it up.
