Hello. Been a while since been on here.
Thread Starter
Registered User
Joined: Jun 2018
Posts: 5
Likes: 0
From: USA
Hello. Been a while since been on here. Hello,
Been a long time follower and been a while since been on here. I have been having some issues for the past 3 weeks with my WS6. The issue I have been having is it will start fine once a day, then threw out the day I have to right foot gas pedal (to stay running) and left foot brake (fun to do with a manual). I did a BCM solder fix back in April. I did the VATS bypass and it didn't fix anything. I programmed the ECM with HPTuners to delete the VATS. I don't know if there was more than one spot to click on to disable it. I replaced the ignition lock cylinder also with the correct resistance key. Tonight I cleaned all the grounds except the ones on the back of the head thinking it might be a grounding issue. I had the engine and battery out of the car for about a year rebuilding the engine. Could I have a bad BCM or could it be something else? My WS6 is a 2001. Edit: Also I changed out the door lock actuator while back and lately I have been getting the door chime with key out of ignition and door wont lock with switch when door is open.
Been a long time follower and been a while since been on here. I have been having some issues for the past 3 weeks with my WS6. The issue I have been having is it will start fine once a day, then threw out the day I have to right foot gas pedal (to stay running) and left foot brake (fun to do with a manual). I did a BCM solder fix back in April. I did the VATS bypass and it didn't fix anything. I programmed the ECM with HPTuners to delete the VATS. I don't know if there was more than one spot to click on to disable it. I replaced the ignition lock cylinder also with the correct resistance key. Tonight I cleaned all the grounds except the ones on the back of the head thinking it might be a grounding issue. I had the engine and battery out of the car for about a year rebuilding the engine. Could I have a bad BCM or could it be something else? My WS6 is a 2001. Edit: Also I changed out the door lock actuator while back and lately I have been getting the door chime with key out of ignition and door wont lock with switch when door is open.
Last edited by abrahamkay28; Jun 21, 2018 at 08:03 AM.
