First LS build.
Thread Starter
Teching In
Joined: Aug 2018
Posts: 3
Likes: 0
From: Cape Coral, FL
First LS build. Hey guys and gals. My name is kyle and im a wrenchaholic.
My fellow wrenchaholic father and I are working on stuffing an LS3 in a 1930 model A Tudor. While this isn't our first project its our first LS. I have a few questions and would also just like to share this project with the world. Because I have been doing research for many months on this project and to my knowledge this could be the only IFS full fender LS Model A Tudor. Unless i just couldn't find one. Which is possible.
My fellow wrenchaholic father and I are working on stuffing an LS3 in a 1930 model A Tudor. While this isn't our first project its our first LS. I have a few questions and would also just like to share this project with the world. Because I have been doing research for many months on this project and to my knowledge this could be the only IFS full fender LS Model A Tudor. Unless i just couldn't find one. Which is possible.
Thread Starter
Teching In
Joined: Aug 2018
Posts: 3
Likes: 0
From: Cape Coral, FL
Well we got our chassis delivered from Superior Glassworks in OR. The powertrain package also showed up this week. We got it all uncrated and looked over. Got the got the clutch mounted up but that’s about it. Made a half *** attempt to mock up the front fenders but the original brackets are gonna need some modifications. Next weekend we should be able to get the engine and trans mounted to start mocking up where the body needs to be cut in the firewall and in the back to get tubed.
