Newbie
Thread Starter
Teching In
Joined: Jul 2019
Posts: 3
Likes: 0
Newbie Thanks for the add . I have a 2000 S10 powered by a 2004 5.3 / power glide /ford 8.8.
I have a stock bottom end 2004 5.3 truck motor. The heads have been ported ( intake and exhaust side) 5 angle valve job 650 lift springs and harden pushrods. Carbed intake and a fitech 600 power adder . The cam specs are adv.277/285
dur@ .50: 227/235. Lobe sep: 110.0
valve lift : .613/.620
I have a stock bottom end 2004 5.3 truck motor. The heads have been ported ( intake and exhaust side) 5 angle valve job 650 lift springs and harden pushrods. Carbed intake and a fitech 600 power adder . The cam specs are adv.277/285
dur@ .50: 227/235. Lobe sep: 110.0
valve lift : .613/.620
