im new from texas
Originally Posted by BigBronco
who knows... i guess just ask her 
.. did i tell you i was moving to texas when i finish my degree?gray if you were to install and this for me i'd give you a hugeeee
btw gray, did you take the texASS director thing cause i was calling you texass for a while? 
just curious...
and the torquer, afrs, 12 bolt, and whatever else i feel like buying in the next month will go in sometime in april when the snow here is gone
just curious...and the torquer, afrs, 12 bolt, and whatever else i feel like buying in the next month will go in sometime in april when the snow here is gone
Originally Posted by 2000BlkCamaroSS
If he's getting something in return, it must be a lot bc that stall and 12 bolt would be some tough work.
nah, that work is nothing when i did it every day for almost a year working at HPE
12 bolt an hour from taking the wheels off to back on..
and it is putting in a cam, not a stall, she drives a six speed
and the cam will take me about 6 hours
and those two times are doing it at a nice right of speed, if i was in a rush, it could be done a lot quicker. the two other techs at the shop will blow me away, but they have been doing ls1's since the beginning
Originally Posted by lilstephsls1
btw gray, did you take the texASS director thing cause i was calling you texass for a while? just curious...
and the torquer, afrs, 12 bolt, and whatever else i feel like buying in the next month will go in sometime in april when the snow here is gone
just curious...and the torquer, afrs, 12 bolt, and whatever else i feel like buying in the next month will go in sometime in april when the snow here is gone
Originally Posted by lilstephsls1
haha i see...
i was gonna say a stall? a4s are for *****.. haha i wont say it.
i was gonna say a stall? a4s are for *****.. haha i wont say it.
but there is always someone faster isnt there steph?
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Originally Posted by BigBronco
i wouldnt, cause i know of many A4's that will make you look bad
but there is always someone faster isnt there steph?
but there is always someone faster isnt there steph?
im sure you know anyways how guys automatically think they are better drivers than girls. i guess we'll find out when i get some times this summer
[QUOTE=2000BlkCamaroSS]
oops... my bad. I guess I got in a hurry reading the post and misunderstood. hehe.. its okay, you just assumed. I find that most guys assume girls drive autos..
Originally Posted by and it is putting in a cam, not a stall, she drives a six speed :D ;)
[/QUOTE
[/QUOTE
oops... my bad. I guess I got in a hurry reading the post and misunderstood.
TECH Enthusiast
Joined: Sep 2004
Posts: 598
Likes: 0
From: Midland, TX
Thats not what I meant by that. I just misunderstood. Auto's aren't that bad anyway. I drive one. They aren't as fun to drive as a M6 but my A4 has been able to keep up, if not beat, any equally modded M6. I like them bc they are more consistent at the track.
Originally Posted by BigBronco
nah, that work is nothing when i did it every day for almost a year working at HPE
12 bolt an hour from taking the wheels off to back on..
and it is putting in a cam, not a stall, she drives a six speed
and the cam will take me about 6 hours
and those two times are doing it at a nice right of speed, if i was in a rush, it could be done a lot quicker. the two other techs at the shop will blow me away, but they have been doing ls1's since the beginning
12 bolt an hour from taking the wheels off to back on..
and it is putting in a cam, not a stall, she drives a six speed
and the cam will take me about 6 hours
and those two times are doing it at a nice right of speed, if i was in a rush, it could be done a lot quicker. the two other techs at the shop will blow me away, but they have been doing ls1's since the beginning
I not trying to be an ******* but you know that I do this for a living and you cannot say that you did these things at HPE. The closest you ever got to installing a 12 bolt here was when my hand was broke and I needed HELP with the heavy lifting, and as far as installing a cam the only thing you did was help me install valve springs. Like I said I'm not trying to be a dick but I take the work I do very seriously. It is not cool that you are feeding people this 
. Seeing you talk like this really makes me 
Trust me People let the professionals do these type of installs many things can go wrong and cause more damage than you think.
Originally Posted by GoldRust
GREY, GREY, GREY I not trying to be an ******* but you know that I do this for a living and you cannot say that you did these things at HPE. The closest you ever got to installing a 12 bolt here was when my hand was broke and I needed HELP with the heavy lifting, and as far as installing a cam the only thing you did was help me install valve springs. Like I said I'm not trying to be a dick but I take the work I do very seriously. It is not cool that you are feeding people this . Seeing you talk like this really makes me Trust me People let the professionals do these type of installs many things can go wrong and cause more damage than you think.
I not trying to be an ******* but you know that I do this for a living and you cannot say that you did these things at HPE. The closest you ever got to installing a 12 bolt here was when my hand was broke and I needed HELP with the heavy lifting, and as far as installing a cam the only thing you did was help me install valve springs. Like I said I'm not trying to be a dick but I take the work I do very seriously. It is not cool that you are feeding people this . Seeing you talk like this really makes me Trust me People let the professionals do these type of installs many things can go wrong and cause more damage than you think.Actually did two others as well before you were an employee there josh. and the cam installs i do were not done at HPE. but i have outwrenched any one of my friends BESIDES you and rick, since you do this for a living. hell you have been in the game for years and everytime i have been asked to work on a c5... i decline for i do not even want to touch one... only vette i did touch, i was taking off parts.
and by the way josh.. i got a call from some guys in florida wanting a roll race. figuring 700 rwhp area for some scratch..
PM Sent..
