New here
Thread Starter
Joined: Aug 2006
Posts: 731
Likes: 10
From: Albuquerque, NM
New here I have a 2002 Z28 A4
Lid, cutout, FRA, ported TB, HomeDepot catchcan
Currently Im putting in the following
B&M Tranny cooler, Vigilante 3600, TransGO shiftkit, stud carrier/girdle kit, 3.42s, Nittos
I have ran a best of 14.1@ 102 in Albuquerque with a DA of 7,400 feet
this was with a lid, cutout and nittos. Hopefully the converter and everything else will put me in the low 13s. Id like to run it in Texas some day to see if I can squeeze a 12 out of it. And my converter and all that should be done on Saturday.
My past GM f-bods/y-bods cars are
1979 Trans Am A4
1985 Firebird v6 M5
1997 Camaro v6 M5
1996 CE Corvette A4
Lid, cutout, FRA, ported TB, HomeDepot catchcan
Currently Im putting in the following
B&M Tranny cooler, Vigilante 3600, TransGO shiftkit, stud carrier/girdle kit, 3.42s, Nittos
I have ran a best of 14.1@ 102 in Albuquerque with a DA of 7,400 feet
this was with a lid, cutout and nittos. Hopefully the converter and everything else will put me in the low 13s. Id like to run it in Texas some day to see if I can squeeze a 12 out of it. And my converter and all that should be done on Saturday.My past GM f-bods/y-bods cars are
1979 Trans Am A4
1985 Firebird v6 M5
1997 Camaro v6 M5
1996 CE Corvette A4
Last edited by Fabian; Apr 25, 2021 at 07:58 PM.
Thread Starter
Joined: Aug 2006
Posts: 731
Likes: 10
From: Albuquerque, NM
Originally Posted by sscam68
Welcome to the forum Fabian.
I think the DA is right aint it? Or was it 7,700 that night?
