New guy from Phoenix
New guy from Phoenix hey guys fairly new here and finally stepped over to the darkside of pistons!
I've always done RX7's and rotarys but have now decided i want more power and retain the driveability.
I'm building a forged 347 ls6 with eagle rods, mahle pistons, patriot heads stage 2, and all of the supporting stuff into my 88 rx7. Just bought a GTK1000 and am building a T56 etc.
Should be a fun street car. Its got full suspension, putting a 4 point cage into it and has full interior.
Thanks!
I've always done RX7's and rotarys but have now decided i want more power and retain the driveability.
I'm building a forged 347 ls6 with eagle rods, mahle pistons, patriot heads stage 2, and all of the supporting stuff into my 88 rx7. Just bought a GTK1000 and am building a T56 etc.
Should be a fun street car. Its got full suspension, putting a 4 point cage into it and has full interior.
Thanks!
Welcome to the darkside rx_treme! You will find lots of helpful information here and for good reading try the stickies they are great!
I'm building a similar project putting a 383 LS6 in a 89 fc. Good luck with Your car and have fun! Carl.
I'm building a similar project putting a 383 LS6 in a 89 fc. Good luck with Your car and have fun! Carl.
Welcome on board. This is one of the best conversions out there. I hear the Turbo axles are pretty tough and can handle a light to med modded LS motor. A friend of mine has an LT1 conversion and it runs a bottom 11 with very basic mods.
Thanks guys... i'll post some pics after the motor comes back from the builders.
There really is a lot of very educated and nice people on here. very helpfull!
Yea I'm not much into drag racing but from what i understand the stock turbo rear ends can go deep into the 10's. we'll see how it does with 700+hp lol
Chopper, have any details on your 383 FC?
There really is a lot of very educated and nice people on here. very helpfull!
Yea I'm not much into drag racing but from what i understand the stock turbo rear ends can go deep into the 10's. we'll see how it does with 700+hp lol
Chopper, have any details on your 383 FC?
