time for change
Thread Starter
Registered User
Joined: May 2008
Posts: 0
Likes: 0
time for change I am begining a project to place a 350 in my 1999 Camaro. Problem I am having is where to begin. I have just recently accuired a Pontiac 350 engine from a 76 firebird. I am looking for any ideas or sugestions on how to make this work or even if the engine will fit. The motor is all stock at this time besides being bored out 60 over as I have been told. I want to beef this motor up prior to install however not sure if it will work and how to. This will be my first hotrod build and would like to know as much as possible about how to go about it and what all parts, changes to body, frame etc... The vehicle has a LITTLE 3.8L in it currently. This motor was given to me but has been sitting for around 3 years. I plan to pull it completely down but as I build it back up, I would like to have as many ideas to asist in the build up. I dont plan to be too crazy with the beef up but a little would be nice, maybe a cam, lifters, etc... So any advice on how to make this possible and what parts or changes that need to be made are welcome. Thanks.
