TPIS Mini-Ram Intake
Thread Starter
Teching In
Joined: Oct 2005
Posts: 5
Likes: 0
TPIS Mini-Ram Intake I have a 1991 camaro Z28 with a 350 TPI engine, and i recently got the engine rebuilt. Then i got TPIS Mini-Ram Intake manifold. I am having problems with the throttle cables coming off the mounting braket on the new manifold lining up with the throttle body. Has anyone who has purchased a Mini-Ram intake had this problem and found a solution? Please help.
I have a TPIS Miniram intake. PM me or reply with a little better description of the problem you are having with the TC bracket. I didn't have any problem there.
I did have plenty of other problems though, mostly complete loss of any bottom end torque without any real hp gain when I was N/A. The other thing I would recomend doing is ditch the fuel rails they sell, and fab up a custom set. I chopped/welded the orig GM rails to fit and they are way better than the TPIS rails. Each TPIS fuel rail has two passages through it, the actual cross section of the hole that the fuel flows through is tiny. Before I made new rails I was burning up spark plugs from going lean on the last few cyl's.
I bought mine 5 or 6 years ago so maybe they changed something, I still have mine though.
Vinny
I did have plenty of other problems though, mostly complete loss of any bottom end torque without any real hp gain when I was N/A. The other thing I would recomend doing is ditch the fuel rails they sell, and fab up a custom set. I chopped/welded the orig GM rails to fit and they are way better than the TPIS rails. Each TPIS fuel rail has two passages through it, the actual cross section of the hole that the fuel flows through is tiny. Before I made new rails I was burning up spark plugs from going lean on the last few cyl's.
I bought mine 5 or 6 years ago so maybe they changed something, I still have mine though.
Vinny
