cajunduby's ss

Does anyone know about this and how much good would it do and is it worth it? Here's the link.

http://www.autoanything.com/air-inta...A1951A0A0.aspx

LS4SPEED

iTrader: (3)

Not gunna help to much, the problem with these cars, air flow wise, is the intake manifold. If you can remedy that problem first, then I'd say go for the maf.

TML529

Can this be used in conjuction with the AirAid throttle body spacer. If you were to use The Powerflow sensor( http://www.jegs.com/i/JET/561/69116/10002/-1)with the Throttle body spacer( http://www.jegs.com/i/Airaid/028/200-586/10002/-1#) plus the Jet power control module(http://www.jegs.com/i/JET/561/10715/10002/-1) shouldn't this give you very noticeable gains.

Pauls325

iTrader: (1)

it could be but dont get it i used mine for a day lose tons of low end the only difference is that the maf screen is removed and the airfoil with the sensor element is cut off early this will only create turbulence in any of the books i have read they always say that the stock maf with the screen will always work best and most consistant unless you plan on logging tons of flow data and makeing a new mass air conversion table put that money towards a different mod trust me

Nacho SS

iTrader: (4)

It just leans your A/F ratio, which is not a good long term thing to do. Just tune or get a good tune with HPT, EFILive, the like to log/improve airflow data.

cajunduby's ss

ok nuff said thanks guys

06MonteSS

http://diablosport.com/index.php?nam...ewtopic&t=4668

CardinalsRed

i just bought a throttle body spacer... and what a waste. mass air flow sensor made a difference, not much but more than the spacer

ImpSS07

iTrader: (3)

I hate to say it but I'm glad you guys spent your money first, now I don't have to waste mine!