Projector Retro
Thread Starter
TECH Apprentice
Joined: Dec 2010
Posts: 383
Likes: 1
Projector Retro So im going Quad bixenon , Ive given up on halogen , too little light for too much power and heat.
Going quad bixenon headlights at 50watts...
And 3000k fogs at 50watts.
4x Morimoto Minis
6x 50w Morimoto Ballasts
4x Phillips 85122+ OR Osram 66240
2x H11 3000k Bulbs
4x CCFL angel eyes
4x Gatling gun shrouds
Should be around 20,000 lumens without the foglights on.
(Too put it in perspective a 9005 bulb makes 1500 lumens... for a total of 3000 lumens with your highbeams , 5000 if your lowbeams stay on)
Working out the final details...
Going quad bixenon headlights at 50watts...
And 3000k fogs at 50watts.
4x Morimoto Minis
6x 50w Morimoto Ballasts
4x Phillips 85122+ OR Osram 66240
2x H11 3000k Bulbs
4x CCFL angel eyes
4x Gatling gun shrouds
Should be around 20,000 lumens without the foglights on.
(Too put it in perspective a 9005 bulb makes 1500 lumens... for a total of 3000 lumens with your highbeams , 5000 if your lowbeams stay on)
Working out the final details...
Thread Starter
TECH Apprentice
Joined: Dec 2010
Posts: 383
Likes: 1
Planning on never hitting animal in this car , i frequent crappy secondary highways at absolutely assinine times of the morning (3-4) as part of my job.
The fogs are for adverse weather conditions.
The fogs are for adverse weather conditions.
Thread Starter
TECH Apprentice
Joined: Dec 2010
Posts: 383
Likes: 1
Im doing it , should be fairly plug and play given the nature of the morimoto's
Planning on doing the it when the boss goes on vacation on the 21st
Also Matt said 50w would be fine so im going for it.
Final parts list is as follows
1) 2x Pair: Morimoto Mini D2S bixenon projectors
2) 2x Pair: Philips 85122+ D2S bulbs
3) 3x Pair: Morimoto 5Five ballasts
4) 1x Pair: Morimoto 3Five H11 3000K bubs
5) 2x Pair: CCFL angel eyes w/ inverters 90mm
6) 2x Pair: Gatling Gun 2.0 shrouds
7) 2x Pcs: 9006 relay wire harness
8) 2x Pcs: 9005 to Solenoid adapters
Ordered moments ago.
Matt with TheRetrofitSource has been awesome
Planning on doing the it when the boss goes on vacation on the 21st
Also Matt said 50w would be fine so im going for it.
Final parts list is as follows
1) 2x Pair: Morimoto Mini D2S bixenon projectors
2) 2x Pair: Philips 85122+ D2S bulbs
3) 3x Pair: Morimoto 5Five ballasts
4) 1x Pair: Morimoto 3Five H11 3000K bubs
5) 2x Pair: CCFL angel eyes w/ inverters 90mm
6) 2x Pair: Gatling Gun 2.0 shrouds
7) 2x Pcs: 9006 relay wire harness
8) 2x Pcs: 9005 to Solenoid adapters
Ordered moments ago.
Matt with TheRetrofitSource has been awesome
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
Thread Starter
TECH Apprentice
Joined: Dec 2010
Posts: 383
Likes: 1
For sure , Had to cross the CCFL's off the list as they are on backorder till the 18th , I want the parts to be here by the 18th!!!!
So TRS is getting me a refund and shipping my stuff off tommorow should be here start of next week
*knock on wood*
4 highbeams
4 lowbeams
3000k Fogs
Cant really get any better than that without adding aux lights haha.
Again i HIGHLY reccomend Theretrofitsource
So TRS is getting me a refund and shipping my stuff off tommorow should be here start of next week
*knock on wood*
4 highbeams
4 lowbeams
3000k Fogs
Cant really get any better than that without adding aux lights haha.
Again i HIGHLY reccomend Theretrofitsource
