DTH and Hogan DP
Thread Starter
Registered User
Joined: Dec 2011
Posts: 7
Likes: 0
From: Wisconsin
DTH and Hogan DP I was just curious if anyone knew if Hogan Performance DP11S or DP7S would work with DT headers if not does anyone know where i can get a Mid-pipe with a hi-flow cat assembled already? thanks
I would not.
The DTH downpipe should be 3"...i'd pickup a 3" highflow cat of your choice and weld it in. This would be an optimal solution. I'm not sure anyone makes a downpipe for DTH with a cat already installed...though I'm sure hogan would want to or be willing to try.
The DTH downpipe should be 3"...i'd pickup a 3" highflow cat of your choice and weld it in. This would be an optimal solution. I'm not sure anyone makes a downpipe for DTH with a cat already installed...though I'm sure hogan would want to or be willing to try.
Thread Starter
Registered User
Joined: Dec 2011
Posts: 7
Likes: 0
From: Wisconsin
[QUOTE]I think the guys that had the DP and then added the headers had to cut ALOT of the DP off to allow the collector for the headers to fit which pretty much makes it useless IMO./QUOTE]
Yeah I can see that basically I'm wondering what i need to install the headers. it seems ill have to weld on a flange to the S pipe I'm just not sure if i need to custom fab something or if theres something that will bolt from the DTH and connect to a Stock exhaust or Magnaflow catback. thanks guys
Yeah I can see that basically I'm wondering what i need to install the headers. it seems ill have to weld on a flange to the S pipe I'm just not sure if i need to custom fab something or if theres something that will bolt from the DTH and connect to a Stock exhaust or Magnaflow catback. thanks guys
All you need to install the headers is tools. If you bought them new from Doug Thorley they come with everything you need to bolt them up to the factory exhaust. Now if you bought them used post up some pics so we can see if you're missing anything.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'
Brett Foote
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Thread Starter
Registered User
Joined: Dec 2011
Posts: 7
Likes: 0
From: Wisconsin
This is everything that came with it. I think I'm missing a O2 extension and bolts the connect the Front header to the crossover. you guys think that S pipe will cause any problems maybe being too short? any info on what the bolt sizes or where i can get a extension would be awsome.
